-
¥1000/件
-
¥980/件
产品分类
universal and compatible hurrySCAN ® III, hurrySCAN ® II, hurrySCAN ® These compact scan heads from SCANLAB provide optimal solutions for nearly all challenges found in industrial laser materials processing. The mechanically and electrically inter-compatible scan heads have apertures ranging from 7 to 30 mm and various levels of dynamics. High long-term stability and low drift values are ensured via integrated temperature stabilization. SCANLAB has products for practically every customer need. Smallaperture systems optimally combine top speed and exceptional precision. Marking speeds exceeding 1000 characters per second can be achieved. Also available are large-aperture scan heads offering small spot size, high speed and laser-power handling up to the multikilowatt range. The housing concept as well as tight manufacturing and assembly tolerances bring high flexibility and certainty to the design and operation of laser materials processing systems. This also facilitates speedy adaptation to individual customer requirements. hurrySCAN ® III scan heads take advantage of the new dynAXIS ® 3 series galvanometer scanners. In conjunction with new electronics, these galvos deliver highest dynamic performance, lowest drift and best linearity. Typical Applications: ? Materials processing ? Marking ? Microstructuring ? Rapid manufacturing ? 3D applications ? Processing-on-the-fly More Information at: hurrySCAN ® III 10, 14 + hurrySCAN ® II 7, 10, 14
Optics
Scan mirrors and objectives with optimized
mounts are available for all typical laser
types and working fields.
To optimally utilize standard objectives,
the hurrySCAN ® 25’s two scan axes have
differing maximum scan angles. This results
in an elliptical image field with the larger
semi-axis perpendicular to the entrance
beam axis.
Control
All scan heads of these series are equipped
with either analog or digital standard interfaces
and are easily controlled via SCANLAB’s
RTC® control boards. All scan heads are
optionally available with an optical fiber
data interface.
Attachment Provisions
Threaded and non-threaded holes at the
housing’s beam entrance side of
hurrySCAN ® 20, 25 and 30 facilitate mounting
of the scan head and installation of
fiber optic outputs.
On the beam exit side, threaded holes are
available for attaching add-on components
such as cross jets, illumination, distance
sensors or thermal shields.
Cooling
The hurrySCAN ® 20, 25 and 30 scan heads
provide water-cooling connections for the
entrance aperture, electronics and galvanometer
scanners, along with air-cooling
of the defl ection mirrors. This ensures
constant working conditions and excellent
long-term stability, thus guaranteeing
reliable operation even in high-laser-power
applications.
Dimensions
Aperture 7 mm 10 mm 14 mm
Beam displacement (dimension b) 9.98 mm 12.56 mm 16.42 mm
Legend
1 Beam in
2 Screws (M6 thread) (#)
3 Flange (#)
4 Alignment pins (6h6) (#)
5 Mounting bracket
6 Connectors
7 Objective
8 Beam out
(#) not included
Standard mounting bracket (10 mm aperture): rectangular, without cut-out
* The hurrySCAN ® II 7´s mounting bracket is higher (101.6 mm instead of 91.6 mm)
and the bore holes are horizontally displaced (45.3 mm instead of 42.8 mm).
** True for 10 mm aperture scan heads, for hurrySCAN ® II 14 and hurrySCAN ® III14
the dimension is 50.1 mm.
all dimensiions in mm
The denoted dimensions refer to standard housing type with 10 mm aperture.
Variations in height and depth of the housing are possible; also housings with water cooling
have other dimensions.