当前位置: 国联资源网 > 采购供应商机 > 供应 > 上海强化油墨供应信息 > 电镀强化油墨47625

电镀强化油墨47625

产品价格
订货总量
  • 议价
  1. 订货说明-
  2. 库存数量1
    付款方式
  3. 发货地址上海
    交货方式
上海凯贤油墨科技有限公司
国联会员第9年
经营执照:
已认证
真实性:
未核验
主营产品:
经营模式:
-
所在地区:
上海 上海
公司地址:
沪宜公路6107号旁

产品分类

暂无分类

店铺人气产品

参数规则
产品品牌:
产品型号:
产品规格:
产品详情
MPE电镀强化系列油墨 油墨特性:主要用于电镀表面、强化表面、真空电镀表面.PU表面.UV表面等材料上,具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。 印刷:丝印移印均可。 表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。 稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。 测试方法(完全干燥后): 1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油; 2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色; 3、 耐磨:橡皮擦500g力水平来回擦500次。 使用方法: 1、使用前应充分搅拌,用后随时封闭; 2、搅拌时加开油水10-15%,稀释到印刷粘度; 3、网板塞网时可用洗网水清洗; 4、不得与其它类型油墨混合使用。 注意事项: 1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷; 2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可; 3、环境温度过高,将会影响油墨原有质量; 4、根据气候变化,请远离火源,阴暗环境下存放。 Oles MPE Plating Ink

MPE plating strengthening series ink characteristics : mainly used in plating surface, enhanced surface, vacuum plating surface.PU surface.UV surface and other materials, with a high color, high color, high covering power, high stability, high alcohol and rub characteristics. Printing: screen printing can be. Surface drying and drying time: surface dry time natural volatile 5-10 minutes; work time within 24 hours. Dilution and cleaning: SV3 slow dry open water, UVK1 ( printing open water) can be simultaneously used 718 washing network water cleaning. Test method ( completely dry ): 1, 3M gummed paper in the paintings of the surface of the ink, 45 degree angle quickly pulled off the oil; 2, 99% of the purity of industrial alcohol, one kilogram of weight of cotton pack in the ink surface, with a horizontal force pulling back and forth 200 times without decolorization; 3: oak, wear resistance eraser 500g force level brush back and forth 500 times. Usage: 1, use should be fully stirred, use at any time after the closure; 2, add water mixing 10-15%, diluted to 3, screen printing viscosity; the plug is available when washing network water cleaning; 4, not with other types of ink mixing. Note: 1, the plastic material similar in appearance, but may be of different materials, customers need to try to determine its requirements, and then batch printing; 2, in the printing process, such as drawing or spread out, may be appropriate to add some slow dry plaster; 3, the ambient temperature is too high, will affect the quality of the original ink; 4, according to climate change, please stay away from fire, dark environment storage.

产品评价
好评度
100%
好评:
中评:
差评:
综合得分
5
好评:
中评:
差评:
评价与规则
产品符合度:
质量满意度:
售后满意度:
发表评论:
发表
石油化工分类
全国找
产品相关搜索
求购推荐
评价规则

评价维度:

1)产品符合度
2)质量满意度
3)售后满意度
每项最低1分,最高5分,整数形式。

单个评价的最终得分:

三个维度得分的加权平均值
1)产品符合度——占比20%
2)质量满意度——占比40%
3)售后满意度——占比40%

单个评价的评价属性:

好评4——5分
中评2——4分(不含)
差评0——2分(不含)

产品的整体评价得分:

所有评价得分与评价数量的比值。

产品的整体好评度:

所有评价得分占总分的百分比之和与评价数量的比值。

在线询盘
点击加载

公众号

小程序

在线客服