进入商铺
在线询盘
产品分类
The raw material of the cast
iron welding surface table is the high -strength cast iron HT200-300 ，whose surface hardness is of HB170-240.After the two manual handing
such as
The packingcae of welding
plate usually adopt the iron package or wooden case.since the welding As the
foudation worktbale of welding and riveting process, we must guarance the
highest flatness accuracy and keep them good maintence.
The direct of using:
1, before using welding
platform, we should use non-corrosive gas to clean the anti-rust oil and wipe
clean with a degreasing cotton,
2, measuring temperature
changes cause accuracy errors .welding platform should be located within a
range of 20 ±
3, welding platform need to
be adjusted with the varitation gauge to the right level and ht load on a
surface plate is distributed over the working surface.
4, when used carefully and
prevent collisions ASAP.
5, If the surface plate is
not required for some days, the surface should be coated anhydrous acidic
anti-rust oil, moisture-proof paper cover, and putted in a clean dry place.
6, welding platform
inspection cycle is up to one year.
