当前位置: 国联资源网 > 采购供应商机 > 供应 > 塑料油墨供应信息 > PP料免处理油墨

PP料免处理油墨

产品价格
订货总量
  • 议价
  1. 订货说明-
  2. 库存数量1
    付款方式
  3. 发货地址上海
    交货方式
上海凯贤印刷科技有限公司
国联会员第9年
经营执照:
已认证
真实性:
未核验
主营产品:
经营模式:
-
所在地区:
公司地址:
上海市嘉定区沪宜公路6106-6107号

产品分类

暂无分类
参数规则
产品品牌:
产品型号:SPPD
产品规格:印刷方式:丝印移印网印 印刷材质:PP,PE,BOPP,LDPE,HDPE 颜色:黑白红黄蓝绿紫 性能:耐酒精,耐汽油,耐手汗,耐磨擦
产品详情
PP料免处理油墨销售厂家!
  油墨特性:拥有和德国彩丽宝一样的颜色,主要用于PP、PE、BOPP等材料上,具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。
  印刷:丝印移印均可。
  表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。
  稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。
  
  测试方法(完全干燥后):
  1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油;
  2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色;
  3、耐磨:橡皮擦500g力水平来回擦500次。
  
  使用方法:
  1、使用前应充分搅拌,用后随时封闭;
  2、搅拌时加开油水10-15%,稀释到印刷粘度;
  3、网板塞网时可用洗网水清洗;
  4、不得与其它类型油墨混合使用。
  
  注意事项:
  1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷;
  2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可;
  3、环境温度过高,将会影响油墨原有质量;
  4、根据气候变化,请远离火源,阴暗环境下存放。
5、技术参考数见下表:
检验项目 检验结果 测试条件
油墨线度 ≤12um 刮板细度计
干膜光泽 ≥65° 60°镜面光泽计
干燥速度 表干 25℃×5-10min 或60℃×2-3min
实干 25℃12Hr或60℃×10min
耐酒精性 无变化 500克力/cm2酒精棉200次来回
附着力 100/100 1mm×1mm×100格3M胶纸剥离
耐酸性 无变化 浸泡5%HCI×24Hr
耐碱性 无变化 浸泡5%NaOH×24Hr
耐盐性 无变化 浸泡5%NaCI×24Hr
耐水性 无变化 浸泡20℃自来水×96Hr
耐磨性 不见底 500克/cm2负载含砂橡皮200来回
耐热性 无变化 80℃×12Hr
Ink characteristics: have and Germany Caili treasure the same color, is mainly used for PP, PE, BOPP and other materials, with a high color, high color, high covering power, alcohol resistant and wear resistance, high stability.
Printing: silk screen printing can be.
Table dry and work time: surface dry time natural volatile 5-10 minutes; work time within 24 hours.
Dilution and cleaning: SV3 slow dry open water, UVK1(printing open water) also can use 718 washing network water cleaning.
Test method (completely dry):
1, 3M adhesive tape sticky ink surface adhesion in painting,45 degree angle quickly pulled off the oil;
2, purity 99% of industrial alcohol, using cotton bag in the surface of the ink one kilogram weight to horizontal force and pull 200 times without decolorization;
3, wear: the eraser 500g force level wipe 500 times back and forth.
Method of use:
1, before the use should be fully mixing, use at any time after the closure;
2, mixing an additional 10-15% in oil and water, diluted to printing viscosity;
3, mesh plug mesh can be used when washing network water cleaning;
4, shall not be mixed with other types of ink.
The matters needing attention:
1, the plastic material of similar appearance, but may be of different materials, customers need to try to determine its requirements, and then bulk printing;
2, in the printing process, such as drawing or spread out,may be appropriate to add some slow dry paste can be;
3, the ambient temperature is too high, it will affect the quality of the original ink;
4, according to the climate change, please stay away from fire, stored in dark environment.
  
产品评价
好评度
100%
好评:
中评:
差评:
综合得分
5
好评:
中评:
差评:
评价与规则
产品符合度:
质量满意度:
售后满意度:
发表评论:
发表
石油化工分类
全国找
产品相关搜索
求购推荐
评价规则

评价维度:

1)产品符合度
2)质量满意度
3)售后满意度
每项最低1分,最高5分,整数形式。

单个评价的最终得分:

三个维度得分的加权平均值
1)产品符合度——占比20%
2)质量满意度——占比40%
3)售后满意度——占比40%

单个评价的评价属性:

好评4——5分
中评2——4分(不含)
差评0——2分(不含)

产品的整体评价得分:

所有评价得分与评价数量的比值。

产品的整体好评度:

所有评价得分占总分的百分比之和与评价数量的比值。

在线询盘
点击加载

公众号

小程序

在线客服