酥饼纸盒上胶包装机C-110D曲奇饼干半自动热熔胶封盒机

典型案例：

（一）性能用途：

1. 适合一切需要上胶、封盒的纸盒包装。例如：饼干、食品、药品、纸巾盒等包装纸盒封口；

2. 人工装好物料放至输送带，机械自动上胶、封口.

3. 机器使用胶量大约是手工封盒胶的1/3，胶水使用量极少；

4. 整机采用不锈钢和铝合金材料，符合食品级标准；

5. 底部装有脚轮，轻松移动；

6. 触摸屏控制自动调节规格，无任何经验者都可在短时间熟悉使用。

（1）Main features:

1. Suitable for all carton packing that needs to be glued and sealed. For example: biscuits, food, medicine, tissue boxes and other packaging carton sealing;

2. Put the materials into the conveyor belt after finishing by people and work, automatically glue and seal on the machine;

3. The amount of glue used by the machine is about 1/3 of that of manual sealing box glue, and the amount of glue used is very small;

4. The whole machine is made of stainless steel and aluminum alloy, meeting food grade standards;

5. Casters are installed at the bottom to move easily;

6. Touch screen control automatically adjusts the specifications;those without any experience can be familiar with the use in a short time.

（二）使用方法：

1.安装入盒输送带； 2.安装尾部出料成品纸盒倒立轮盘； 3.打开电源开关，用触摸屏数控调节生产盒子尺寸（进入指引界面）；

4.胶轮定点（点动调试、当盒子走到胶槽位置再灵活定位胶轮）；

5.将热熔胶放入胶槽——安装净化器，根据不同热熔胶来设定封盒机加热温度，待胶完全熔化；

6.接通气源，按下启动键；

7.放置装好产品的纸盒到封盒机输送带；

8.自动输送，封盒机开始自动完成涂胶折盖送出成品。

(2)Usage:

1. install the conveyor belt into the box;

2 install the inverted rotary disc of the paper box of the finished product discharged from the tail;

3 turn on the power switch and adjust the size of the production box with the touch screen numerical control (enter the guide interface);

4 set the rubber wheel at a fixed point (point and adjust, position the rubber wheel flexibly when the box goes to the position of the rubber groove);

5 put the hot melt adhesive into the glue tank -- install the purifier, set the heating temperature of the box sealing machine according to different hot melt adhesive, and wait for the glue to melt completely;

6 turn on the gas source and press the start button;

7. place the carton packed with products into the conveyor belt of the box sealing machine;

8.automatic transmission;the sealing machine starts to automatically complete the gluing and folding cover to send the finished products.

（三）产品质量保证：

一．材质采用不锈钢铝材型，精美耐用；全部是精炼炉生产的不锈钢，保证不会出现生锈，褐色现象。

二．三道关口，保证出厂产品**优质耐用；

（1）安装好，必须经过检验员细心检测。

（2）检验好，必须经过开机检查。

（3）出厂前，再次进行打样检查。

（3）Product quality assurance:

1. The material is made of stainless steel aluminum, fine and durable.All the stainless steel produced by AOD refining furnace is guaranteed not to rust and brown.

2. Three passes pass, guarantee factory product absolute high quality durable;

(1) after installation, it must be carefully tested by the inspector.

(2) the inspection is good, and it must be started up.

(3) conduct sample making inspection again before delivery.

（四）参数Parameters：

（五）实拍大图The actual figure：

（六）机器用胶The machine with glue：